Siemens HiPath 3000 HiPath 5000 RSM Making Calls Basic Functions, Making and Answering Calls

Models: HiPath 3000 HiPath 5000 RSM

1 72
Download 72 pages 63.33 Kb
Page 10
Image 10

Making Calls – Basic Functions

Step by Step

n uor v

Speaker

Speaker

Making Calls – Basic Functions

Making and Answering Calls

Special default ring signaling is set for your telephone:

When you receive an internal call, your telephone rings once every four seconds (single-tone se- quence).

When you receive an external call, your telephone rings twice in rapid succession every four seconds (dual-tone sequence).

When you receive a call from the entrance tele- phone, your telephone rings three times in rapid succession every four seconds (triple-tone se- quence).

If a call is waiting, you hear a short tone (beep) every six seconds.

Answering a Call

The telephone rings.

Lift the handset.

To raise or lower the volume, keep pressing the keys un- til the desired volume is set.

Open Listening in the Room During a Call

You can let other people in the room join in on the call. Let the other party know that you have turned on the speaker.

Precondition: You are conducting a call with the hand- set.

Activating this function:

Press the key. The LED lights up.

Deactivating this function:

Press the key. The LED goes out.

10

Page 10
Image 10
Siemens HiPath 3000 HiPath 5000 RSM Making Calls Basic Functions, Making and Answering Calls, Answering a Call