Step by Step | Siemens HiPath 3000 HiPath 5000 RSM specification

Using Other Functions/Services

Step by Step

o

o

r

o

or

o

•Lock and unlock all phones, code: *66/#66 Æ Page 35

•Save PIN,

code: *93 Æ Page 36

•Send a message,

code: *68/#68 Æ Page 37

•Group ringing, code: *81/#81 Æ Page 47

•Group call, code: *85/#85 Æ Page 46

•Suppress caller ID,

code: *86/#86 Æ Page 33

•Open door, code: *61 Æ Page 18

•Door opener on/off, code: *89/#89 Æ Page 19

•Control relay, code *90/#90 Æ Page 44

•Do not disturb, code: *97/#97 Æ Page 33

•Speed-dialing, code: *7 Æ Page 19

•Associated service, code: *83 Æ Page 41

Precondition: You have a telephone that uses tone di- aling (DTMF dialing) or you can switch your telephone to tone dialing. The telephone is not connected to the system.

Set up a call to the system. Enter the station number (contact the service personnel).

Wait for a continuous tone (if necessary switch the tel- ephone to tone dialing), then enter the internal number that has been assigned to you and the associated PIN.

Enter the code (necessary only if programmed in the system).

Wait for a dial tone and then enter the code, such as *97 for Do not disturb on. Make other inputs as necessary; (refer to the operating instructions for pulse and DTMF telephones).

Dial the external number.

You can only execute one function at a time, or set up only one outgoing connection.

The connection is immediately released after successful activation of a function.

In the case of an external-external call, the connection is released as soon as either of the parties ends the call.

42

Image 42

Siemens HiPath 3000 HiPath 5000 RSM operating instructions Step by Step

Contents

HiPath 3000 HiPath 5000 RSM Before You Begin Important NotesMarks Contents Appointments Function Using Other Functions/Services Using Team FunctionsTesting the Telephone Index Basic operating instructions OptiPoint 500 entry control panel How to Use these Operating Instructions With Function Keys Accessing FunctionsWith Codes Qmk rmk Open Listening in the Room During a Call Making Calls Basic FunctionsMaking and Answering Calls Answering a Call Answering a Call With the Handset Dialing Numbers/Making CallsEnding the call On-Hook Dialing Calling a Second Party Consultation Hold Redialing a NumberTurning the Microphone On and Off Turning off the mute Call Forwarding Switching to the Party on Hold ToggleUsing Variable Call Forwarding Transferring a Call Rew Qjh eor f or g Rjh Deactivating call forwarding Answering a Callback Using CallbackStoring a Callback Deleting All Stored Callbacks Adjusting the Ring Tone Telephone SettingsAdjusting the Ring Volume Adjusting the Receiving Volume During a Call Making Calls Using the SpeakerphoneMaking Calls Convenience Functions Rejecting Calls Qje ow Speaking to visitors via the entrance telephoneOpening the door with a code at the door Rlm ow Speed-DialQlm o ow Qk o Qmf ow Rjlg or Using MailboxesTalking to Your Colleague With a Speaker Call Qld ow Reserve Trunk Automatic Connection Setup HotlineWhen the reserved trunk becomes free Assigning a Station Number Not for U.S Associated Dialing/Dialing Aid Qjk ow Accepting a Waiting Call Camp-On Using Call WaitingDuring a Call Qii Parking a Call Preventing and Allowing Call Waiting Auto- matic Camp-OnTurning the Call Waiting Tone On and Off Rhmd or qhmd w Qlkor rlkw Rij Picking up Retrieving a Held CallConducting a Conference Qjg Adding Up to Five to the Conference Initiator Only Leaving a Conference Qhme QigEnding a Conference Initiator Only After a Speaker Call Announcement in a Group Trunk FlashQie o Busy Override Joining a Call in Progress If You Cannot Reach a DestinationCall Waiting Camp-On Qjfw Using Night Answer Qhh Rhhw Saving Appointments Using Timed RemindersAppointments Function Qhj o Displaying and Assigning Call Charges Dialing with Call Charge AssignmentQjd o Caller ID Suppression Private Sphere/SecurityTurning Do Not Disturb On and Off Qmkor rmkw Qljor rljw Silent Monitor Monitoring a RoomQmhh o Qllw Locking the Telephone to Prevent Unauthorized Use Qlh Qjj or rjj owTo lock and unlock the telephone Locking Another Telephone to Prevent Unauthorized Use Saving Your PINQmhg o Qmg o Deleting Sent Messages Using Other Functions/ServicesSending a Message Qjl o Rjlew Using Another Telephone Like Your Own Answering MessagesQidl o Change call number relocate Qmhem Rmhem Rdw Using System Functions from the Outside Activating Functions for Another TelephoneQlg o Step by Step Telephone Data Service Qhf Simple Paging Equipment Controlling RelaysRadio Paging Not for U.S Qmdor rmd Enhanced Paging Equipment Hipath 3700/ 3750 Only Qim o Qhi ow Rhi oAnswering the page from the nearest telephone Rlior qliw Rlior qli rw Using Team FunctionsTurning Group Call On and Off You belong to a hunt group or a group call Qik Qle ow Rlew Accepting a Call for Another Member of Your TeamActivating and Deactivating a Ringing Group Saving telephones for the ringing group Uniform Call Distribution UCD Qhdeor rhde ow Rhdfor qhdfQhdgor rhdg Qhdhor rhdh Forwarding Calls on Lines QideRide Testing the Telephone Testing the Telephone FunctionsQidf Ridf Qmhd Qhk Rlior qliw Special Functions in the LAN PC NetworkLeaving a Hunt Group/Group Call You belong to multiple groups of another HiPath Transferring Call Forwarding QhkRew Qhk Qhh Rhhw Qle Rlew Saving the telephones for the ringing group Qhk Qmdor rmd Opening the Door Qhk o Qje Documentation Fixing Problems Telephone MaintenanceTroubleshooting Index Call Multiple subscriber number MSN Preventing and allowing automatic camp UCD Overview of Functions and Codes Alphabetical NrjhfwoMSN w NrewNrjhewoMSN w NrjhgwoMSN w Qjeo Int Qmd e ...h wRmd e ...h w Rlmo Int. w NrhioInt NqhioInt. wNqimoInt Qij QldoInt. w QjloInt. d...m wWrjlg Qljw Nrhdfw NqhdeoCode wNrhdew Nqhdfw FCC Certification and Requirements ServiceFCC and Industry Canada Compliance FCC Rules, Part FCC and Industry Canada Compliance Equipment Attachment Limitations Ringer Equivalence Number RENEquipment Attachment Limitations Ref. No. A31003-H1012-C120-5-7619