Gigaset 4010 Comfort, CHIN eng,
Selecting VIP Ringer Tones (handset
and base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until “VIP Ring” appears
Press | or | to select the ringer melody. (8 melodies) |
Press the Mem/Prog key for confirmation
Press Exit to exit
Note: you must apply for “Show incoming call number” service (or Caller ID Service) to validate this function.
Select Caller Ringer Tones (handset and
base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until “Int Ring” appears
Press | or | to select the melody. (8 melodies) |
Press the Mem/Prog key for confirmation
Press Exit to exit
Registering the Handset (INT)
You can register up to four handsets on your base. During the registration, place the handsets close to the base. If you want to know the registration number of each handset, press the “INT” key on the handset, then the register number will be displayed on the handset (HS 1, HS 2, HS 3, or HS 4).
Long press the “INT” key on the base (do not release until registration for all handsets has been completed), until “CodE
____” is displayed on the LCD of the base.
Press the “INT” key on a handset (the handset and the base will respectively display “HS 1” and “CodE ____” register numbers,
and when both the handset and the base ring, you can release the key on the handset, then release the key on the base).
Activating/deactivating Ringer
Handset
Activating ring
Be sure the handset is in standby. Press the Mem/Prog key.
Then press the # key,the handset will sound a confirmation tone.
10
