Siemens HWCD8518(3)P/TSDL user manual Base holding, Intercom mode, Transferring a call

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

the user wants to operate in their internal system, then he/she must change the pulse dialing to tone dialing temporarily.

For example, you are required to enter your bank account number:

1.Dial the bank’s number.

2.Press * key when putting through.

3.Act according to the voice instructions over the phone.

4.When finish, you can hang up the phone, and then the phone returns to pulse dialing.

Base holding

Base -- call holding

Press the Hold key when talking to pause, and press again to resume the call.

Intercom mode

Searching for handset / base and intercom

Base paging handset

Press the Intercom /Exit key on the base.

Press Talk key on the handset to stop the ring and start talking to the base.

When finished, press the Hands-free/Dial back key on the base or Talk key on the handset to terminate the call.

Handset paging base

Press Intercom /Exit key on the handset.

Press the Hands-free/Dial back key or pick up the handset from the base to stop the ring and start talking by handset. When finished, terminate the call by pressing the Hands-free/Dial back key on the base, pressing the Talk key on the handset, or placing the handset back to the base. Note: When the handset and the base are being used through intercom and a call comes in, both will stop and ring.

Press either the Hands-free, the Talk key on the base, or the handset to answer the call.

Transferring a call

Transferring a call from the base to the handset

When the user is answering a call using the base: Press Intercom/Exit key on the base.

Dial handset code (1, 2, 3 or 4). The base will call the

14