Siemens HWCD8518(3)P/TSDL user manual Adding IDD code to the incoming calls Handset and base

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Adding IDD code to the incoming calls

(handset and base)

Press the Mem/Prog key for 3 seconds

Press Channel/Select key till “Lo CodE” appears

Enter one digit of IDD code, which can be deleted by pressing the Flash/Clear key.

Press Mem/Prog key for confirmation Press Exit to exit

Adding external mark to the incoming calls

(handset and base)

Press the Mem/Prog key for 3 seconds

Press the Channel/Select key until “Add” appears

Enter one digit of “9”. (For example, you need to enter “9” for placing outgoing calls. When placing an outgoing call, you must enter “9” before dialing out.)

Press the Mem/Prog key for confirmation Press Exit to exit

Adjust the LCD light (handset and base)

Press the Mem/Prog key for 3 seconds

Press the Channel/Select key till “LCD” appears

Press or to adjust the light

Press the Mem/Prog key for confirmation

Press Exit to exit

Selecting Ringer Tones (handset and base)

Press the Mem/Prog key for 3 seconds

Press the Channel/Select key until “Ring” appears

Press or to select the ringer melody. (8 melodies)

Press the Mem/Prog key for confirmation

Press Exit to exit

9