Preparing to use the phone | Siemens HWCD8518(3)P/TSDL guide

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Preparing to use the phone

The pack contains:

zBase

zHandset

zMicrophone.

zMicrophone cord (coiled)

zRechargeable batteries

zCharger

zPhone cord

zTwo power supply units with power cord

zOne set of operating instruction

Installing the phone

1.To open the battery compartment, press the battery cover of the handset and slide it down.

2.Insert the battery plug into the socket in the battery compartment and place the batteries into the battery compartment

3.Push up the battery cover

4.Place the handset with batteries into the charger

5.Insert small jack of the power supply unit into the socket on the back of the charger, and then plug the other end into the 220V power outlet.

6.Raise the antenna

7.Insert the jack on the power supply unit into the socket on the back of the base, and then plug the power supply unit into your power outlet. When the LED on the base lights up, the base is powered.

Note: For the initial charge we recommend a continuous, uninterrupted charging period of more than twelve hours before use.

8.Fit the small jack on the phone cord into the socket in the base and fit the other end into phone outlet.

9.If “Ringer Off” is shown on the display, please set the ringer tone to “ON” according tothe descriptions in the “Ring switch” section.

4

Image 4

Siemens HWCD8518(3)P/TSDL user manual Preparing to use the phone, Pack contains, Installing the phone

Contents

Be inspired Expandable cordless phone system Table of contents Appendix Interface Illustration Preparing to use the phone Installing the phonePack contains Descriptions of displays of the handset Base Descriptions of the function keys Indicators Description of the function keys on the handsetPage Settings Tone/pulse switchFlash timing switch Setting the date and the time Adjust the LCD light handset and base Adding IDD code to the incoming calls Handset and baseAdding external mark to the incoming calls Handset and base Selecting Ringer Tones handset and base Selecting VIP Ringer Tones handset Base Select Caller Ringer Tones handset BaseRegistering the Handset INT Activating/deactivating Ringer Adjust Volume Base Adjusting the ringer volumeHandset and base Handset Answering/Ending a call Making a CallOutgoing call Last number redialing Basic operation External call and power indicators Deleting a single outgoing numberDeleting all outgoing numbers Call ending function Intercom mode Base holdingTransferring a call Searching for handset / base and intercom Displaying incoming numbers Transferring a call from the handset to the baseTransferring a call from one handset to another Incoming call records Browsing incoming call records Directory Deleting a single incoming call numberDeleting all incoming numbers Browsing and dial the incoming numbers Setting VIP calls Storing phone numbersBrowsing lists in the Directory Adding dialing pause Deleting a single number in the Directory Dialing from stored caller-IDDeleting all numbers in the Directory Storing IP numbers Speed dialParts of a long-distance number Location in the Directory PIN lock Setting PIN and Lock CodeIP dialing and dial back Battery indication UnlockingMechanical lock Ringing back Replacing batteries Safe use of the batteriesIndicating information Care Calls Hotline Handset Base Top and side Base Bottom and Rear