Making Calls – Convenience Functions
37
Step by Step
Having the number of the called station displayed
If the number of the station for which you (as a member
of a call pickup group) wish to pick up a call does not ap-
pear on the display, you can enter the code for "Display
on request" after lifting the handset. If you are not sure
of this feature access code, ask the service personnel:
nLift the handset.
After the code has been entered, the station number of
the telephone that has been called is displayed.
Taking a call in a hunt group
Calls are distributed to any idle member of a hunt group.
Your telephone rings.
nLift the handset.
Incoming call on loudspeaker (speaker call 2-way)
A colleague addresses you directly over the speaker.
The speakerphone mode is automatically activated.
Answering via speakerphone is immediately possible.
or nLift the handset and reply.
Enter the code!
This function is only available with
optiPoint 420 standard.
You can address the colleague directly
page 44.
Activating stop voice calling page 81.