■If your network uses static IP addresses, type:

sc> setsc netsc_dhcp false sc> setsc netsc_ipaddr ip-address

sc> setsc netsc_ipnetmask ip-netmasksc> setsc netsc_ipgateway ip-address

■If your network uses Dynamic Host Configuration Protocol (DHCP), type:

sc> setsc netsc_dhcp true

4.Type one of the following commands:

■ If you intend to use Secure Shell (SSH) to connect to ALOM CMT:

sc> setsc if_connection ssh

■- If you intend to use Telnet to connect to ALOM CMT:

sc> setsc if_connection telnet

5.Reset the system controller so that the new settings take affect:

sc> resetsc

6.After the system controller resets, log in to the system controller and issue the shownetwork command to verify network settings:

sc> shownetwork

To connect through the network management port, use the telnet or ssh (based on the value you provided in Step 4) commands to the IP address you specified in Step 3 of the preceding procedure.

8 SPARC Enterprise T1000 Server Administration Guide • April 2007