Controlling the Locator LED

You control the Locator LED from the sc> prompt or by the Locator button on the front of the chassis.

Locator Button/LED

FIGURE 2-1Locator Button on the Front of the Server Chassis

●To turn on the Locator LED from the system controller command prompt, type:

sc> setlocator on

●To turn off the Locator LED from the system controller command prompt, type:

sc> setlocator off

●To display the state of the Locator LED from the system controller command prompt, type:

sc> showlocator

Locator LED is on.

Note – You do not need user permissions to use the setlocator and showlocator commands

Automatic System Recovery

The system provides for automatic system recovery (ASR) from failures in memory modules or PCI cards.

30 SPARC Enterprise T1000 Server Administration Guide • April 2007