TABLE A-1OpenBoot Configuration Variables Stored on the System Configuration Card (Continued)

Variable

Possible Values

Default Value

Description

 

 

 

 

ttya-mode

9600,8,n,1,-

9600,8,n,1,-

Serial management port (baud rate, bits,

 

 

 

parity, stop, handshake). The serial

 

 

 

management port only works at the default

 

 

 

values.

output-device

virtual-

virtual-

Power-on output device.

 

console,

console

 

 

screen

 

 

input-device

virtual-

virtual-

Power-on input device.

 

console,

console

 

 

keyboard

 

 

auto-boot-on-error?

true, false

false

If true, boot automatically after system

 

 

 

error.

load-base

0-n

16384

Address.

auto-boot?

true, false

true

If true, boot automatically after power on

 

 

 

or reset.

boot-command

variable-name

boot

Action following a boot command.

boot-file

variable-name

none

File from which to boot if diag-switch?

 

 

 

is false.

boot-device

variable-name

disk net

Devices from which to boot if

 

 

 

diag-switch? is false.

use-nvramrc?

true, false

false

If true, execute commands in NVRAMRC

 

 

 

during server startup.

nvramrc

variable-name

none

Command script to execute if

 

 

 

use-nvramrc? is true.

security-mode

none, command,

none

Firmware security level.

 

full

 

 

security-password

variable-name

none

Firmware security password if

 

 

 

security-mode is not none (never

 

 

 

displayed). Do not set this directly.

security-#badlogins

variable-name

none

Number of incorrect security password

 

 

 

attempts.

 

 

 

 

58 SPARC Enterprise T1000 Server Administration Guide • April 2007