6.Type the type command at the format> prompt, then select 0 (zero) to auto configure the volume.

For example:

format> type

AVAILABLE DRIVE TYPES:

0.Auto configure

1.Quantum ProDrive 80S

2.Quantum ProDrive 105S

3.CDC Wren IV 94171-344

4.SUN0104

5.SUN0207

6.SUN0327

7.SUN0340

8.SUN0424

9.SUN0535

10.SUN0669

11.SUN1.0G

12.SUN1.05

13.SUN1.3G

14.SUN2.1G

15.SUN2.9G

16.Zip 100

17.Zip 250

18.Peerless 10GB

19.LSILOGIC-LogicalVolume-3000

20.other

Specify disk type (enter its number)[19]: 0

c0t0d0: configured with capacity of 68.35GB <SUN72G cyl 14087 alt 2 hd 24 sec 424> selecting c0t0d0

[disk formatted]

7.Use the partition command to partition, or slice, the volume according to your desired configuration.

See the format(1M) man page for additional details.

8.Write the new label to the disk using the label command.

format> label

Ready to label disk, continue? yes

54 SPARC Enterprise T1000 Server Administration Guide • April 2007