After you log in to your ALOM account, the system controller command prompt

(sc>) appears, and you can enter system controller commands. If the command you want to use has multiple options, you can either enter the options individually or grouped together, as shown in the following example. The commands shown in the following example are identical.

sc> poweroff -f -y sc> poweroff -fy

Logging In To The System Controller

All environmental monitoring and control is handled by the system controller. The system controller command prompt (sc>) provides you with a way of interacting with the system controller. For more information about the sc> prompt, see “ALOM CMT and The sc> Prompt” on page 16.

For instructions on connecting to the system controller, see:

■“Accessing the System Controller” on page 6

■“Activating the Network Management Port” on page 7

Note – This procedure assumes that the system console is directed to use the serial management and network management ports (the default configuration).

26 SPARC Enterprise T1000 Server Administration Guide • April 2007