3.Verify that the member disks are available and that there is not a volume already created. using the raidctl command:

The server’s on-board SAS controller can configure one RAID volume. Prior to volume creation, ensure that the member disks are available and that there is not a volume already created.

#raidctl

No RAID volumes found.

See “Physical Disk Slot Numbers, Physical Device Names, and Logical Device Names for Non-RAID Disks” on page 42.

The preceding example indicates that no RAID volume exists. In another example, a single IM volume has been enabled. It is fully synchronized and is online:

# raidctl

 

 

 

RAID

Volume

RAID

RAID

Disk

Volume

Type

Status

Disk

Status

------------------------------------------------------

c0t0d0 IM

OK

c0t0d0

OK

 

 

c0t1d0

OK

44 SPARC Enterprise T1000 Server Administration Guide • April 2007