▼To Get to the ok Prompt

1.Decide which method you need to use to reach the ok prompt. See “OpenBoot ok Prompt” on page 18 for details.

2.Follow the appropriate instructions in TABLE 1-3.

TABLE 1-3Ways of Accessing the ok Prompt

Access Method

What to Do

 

 

Graceful shutdown of

• From a shell or command tool window, issue an appropriate

the Solaris OS

command (for example, the shutdown or init command) as

 

described in Solaris system administration documentation.

 

 

L1-A (Stop-A) keys or

Break key

•From a keyboard connected directly to the SPARC Enterprise T1000 server, press the Stop and A keys simultaneously.*

•From an alphanumeric terminal configured to access the system console, press the Break key.

system controller

1.

From the sc> prompt, type the break command. The break

break and console

 

command should put the system in a state in which the

commands

 

operating environment software is not running and the server is

 

 

under OpenBoot firmware control.

 

2.

Then issue the console command.

 

 

 

Manual system reset

•

From the sc> prompt, type the reset command.

 

 

 

*Requires the OpenBoot configuration variable input-device=keyboard. For more information, see “Sys- tem Console OpenBoot Configuration Variable Settings” on page 23.

22 SPARC Enterprise T1000 Server Administration Guide • April 2007