Siemens V1.2.33 manual Stopping a Scan, Resetting the Scan Result, Device type

Listing Connected IP Phones

Device type

The Device type column lists the optiPoint devices each with an assigned icon. This column could look as follows in another network:

If you hid the Device type column (Æ page 11) and the list contains differ- ent device types, the following message will prompt you to display the col- umn after the scan:

If you do not display the Device type column, you will be unable to config- ure any devices as the Configure Selected Devices function will not be available Æ page 17.

Stopping a Scan

You can interrupt a scan at any time. Call with Stop from the Scan menu on the menu bar.

Resetting the Scan Result

If the result is unsatisfactory, for example, or if you want to change or ex- tend the IP address range, you can reset the values in the current device list. Call with Reset from the Scan menu on the menu bar.

14