Siemens V1.2.33 manual Pstn acces code, QoS L2/L3, Realm, Register by name, Registration LEDs

Parameters

PSTN acces code

Access code for the Æ PSTN telephone network.

QoS L2/L3

•The settings are based on the Æ QoS areas Æ Layer 2 and Æ Layer 3 that control the prioritization of transmitted data.

•Æ Layer 2 Priority and Virtual LAN ID (Æ VLAN ID) can be modified for layer 2. Æ Layer 3 Voice/Signaling can be modified for layer 3.

•The activation of Æ Layer 2 and/or Æ Layer 3 support is only recom- mended if the Æ Switch used can interpret this information

(for example "Æ Layer 2 switch").

Realm

Display or change the SIP Realm value. SIP realm is used to identify the phone at the SIP server.

Register by name

If this option is enabled and a terminal name is entered, this name will ap- pear in the display in the second line on the left. The option is disabled by default.

Registration LEDs

The LEDs illuminate when the telephone is activated. This indicates that you have registered correctly. You can enable or disable this function with on and off.

Registration Timer

Use this function to specify the amount of time required for logging on to the SIP server again. Logging on again ensures that the SIP telephone re- mains logged onto the SIP server. This enables you to also detect any serv- er connection problems. The timer is preassigned the value 0 and can have a maximum value of 72 minutes.

Ringer Melody

Select the Ringer Melody for the current alarm to be set in the Audio/Visual Indications tab. You can set the following values:

•silent or

•level 1 to 8

Ringer Sequence

Select the Ringer Sequence for the current alarm to be set in the Audio/ Visual Indications tab. You can set the levels 1 to 3.

64