Parameters
61
Layer 2 Priority
• You can only set this if ÆLayer 2 support is active (ÆQoS L2/L3).
• You can set a priority value between 0 and 7 for each of the 64 positions
here (priority 7: high, 0: low).
• This additional data transmission information is used for forwarding pri-
ority decisions when data arrives in a ÆSwitch.
LDAP Server Addr
Also known as "LDAP Directory Server IP address" or "Server address".
• This can only be configured for optiPoint 600 office and optiPoint 410
standard/advance HFA.
• If you are using an ÆLDAP server, enter the ÆIP Address of this serv-
er here.
LDAP template name
• Enter the name of the LDAP template file that is used in connection
with the ÆLDAP server.
• The file must be saved on the ÆFTP server in a specific directory
(ÆDownload Server IP Address, ÆFile path).
LDAP folder
Name of the directory on the ÆFTP server where you saved the ÆLDAP
file.
LDAP Server Port Number
• Also known as Port Number. This can only be configured for
optiPoint 600 office and optiPoint 410 standard/advance HFA.
• If you are using a ÆLDAP server, enter the ÆPort number here for
communication with this server.
• Possible values: 1 ... 65535.
Line Key action mode
Reserved for future function.
Location code
Enter the location code (the call number without extension number,
for example, of your company).
Location ID number
Contains the name or number saved for the phone on the server. This is
automatically entered in optiPoint and output on the display (also known as
local id). If a name is not available, the Location identifier number (LIN) is
output on the display.