Siemens V1.2.33 manual Dhcp

Parameters

Default domain name

Enter your Æ Domain name here.

Default Gateway

•Enter the Æ IP Address that was assigned to your Æ PBX in the De-

fault Gateway provided this value was not assigned dynamically by a Æ DHCP server.

•If the value was assigned dynamically, it is read-only here.

DHCP

•Enable this option if you want a Æ DHCP server to assign the neces- sary IP data dynamically for the phone.

•Disable this option if there is no DHCP server available in the IP net-

work. In this case, the data for the Terminal IP Address and Terminal Mask must be manually assigned and the Æ Default Route must be manually set.

Dialplan enabled

Select on or off to determine whether or not a Æ Dial Plan should be used.

Dial Plan and Download file

Via Browse, scan the local file system for a Æ Dial Plan to download. Se- lect Download file to send the required Æ Dial Plan to the telephone.

DNS server address

•Only enter the Æ IP Address of the Æ DNS server here if this was not assigned dynamically by a Æ DHCP server and you are not operating the optiPoint device at a Æ PBX over Æ HFA.

•Default address: Blank by default.

DNS domain name

•Only enter the name of the associated Æ Domain if you cannot operate the optiPoint device at a Æ PBX over Æ HFA.

•Default name: Blank by default.

Download Server IP Address

Enter the Æ IP Address of the Æ FTP server here so that you can upload and download files from/to optiPoint 410.

Domain access code

Access code for Æ Domain

56