Siemens V1.2.33 manual Creating a Device List, CTRL+A or

Listing Connected IP Phones

Creating a Device List

Before searching for optiPoint phones, you must specify the IP addresses in the Add Devices mask.

Call with

•Add from the Edit menu on the menu bar or

•CTRL+A or

•the Add devices icon on the toolbar (Æ page 9)

The following dialog appears:

Click the required dialog option, either Add a single device or Add a range of devices. Enter an IP address or an IP address range which you want to scan for devices. Confirm you input with Add.

Overlapping ranges are not permitted. However, you can enter an IP address as an address range, for example

192.168.1.105 to 192.168.1.105.

A table is displayed in the Device_List window.

Close the Add Devices dialog with Quit if you do not want to add any more IP addresses.

10