Parameters

System type

Enter HiPath GK if the system environment is HiPath 5000.

Enter Non-HiPath GK if you are using a third-party Æ Gatekeeper.

Enter Æ Gateway if you are using a HiPath HG 1500.

Enter Direct if you are using IP dialing and no Æ Gatekeeper.

In optiPoint 410 standard/economy/entry HFA, you can choose be- tween HiPath 4K V1.x, HiPath 4K V2.x and HiPath 3K V4.0.

Tag

Enter the required tag for the current alarm to be set in the Audio/Visual Indications tab.

Terminating line preference

Reserved for later use.

Time

You should only mark this option if this information is not automatically transmitted (for example by the Æ PBX or an Æ DHCP server).

If this option is marked, the computer’s system time is applied.

Time to live (minutes)

Use this function to specify the interval at which the telephone should send a signal to the Æ Gatekeeper (every time one third of the time set elapses). If the "Time to live" value is set to three minutes, for example, the telephone sends a signal every minute.

The highest value you can set is 4320 seconds, that is, three days.

Timezone offset

You should only enter data here if an Æ SNTP server provides time in- formation.

The data describes the offset in hours compared to time information of the SNTP server.

Tone_Duration

Enter the duration of the tone in seconds for the current alarm to be set in the Audio/Visual Indications tab.

69

Page 69
Image 69
Siemens V1.2.33 System type, Tag, Terminating line preference, Time to live minutes, Timezone offset, ToneDuration