DART 300 Migration Guide |
| Comparative AT Command Reference | |||
Table |
|
|
|
| |
|
|
|
| ||
Register | DART 200 | DART 300 |
| ||
|
|
| |||
52 | PAD Primary Forwarding Character 2 | Not supported. The DART 300 has only one | |||
|
| Primary Forwarding Character (+WS64). | |||
53 | IP Address and port number of current | Not supported. The IP address can be | |||
| TCP/UDP session partner. | obtained with +WVCALLERIP. The port | |||
|
| number is not available. |
| ||
57 | State information (bitmapped) | Not supported. The various elements reported | |||
|
| by the DART 200 can be queried on the | |||
|
| DART 300 using the command equivalents: | |||
|
| b0,1 | = | +WS56? | (registration status) |
|
| b2,3 | = not supported (Use DCD) | ||
|
| b4,5 | = | +WS173? | |
|
| b6 | = | not supported | |
|
| b7 | = | +WPRSSI | (coverage/ |
|
|
|
|
| chan acquisition.) |
56 | Last registration result code received from the | Not supported. Registration progress is | |||
| network. | available from register +WS201. The values | |||
|
| have different meanings from those of the | |||
|
| DART 200. |
| ||
58 | PAD status (bitmapped) | Not supported. The various elements reported | |||
|
| by the DART 200 can be queried on the | |||
|
| DART 300 using the command equivalents: | |||
|
| \T | = +WS70? | (PAD frwd timer) | |
|
| \M | = | +WS63? | (Pri. frwd. char) |
|
| \Q | = | (Always H/W flow) | |
|
| \F | = | +WS63? | (Pri. frwd. char) |
|
| \O | = | (no Telnet support) | |
62 | Connection Failure | Not supported. |
| ||
63 | Connection Failure Probable Cause | Not supported. |
| ||
70 | PING Wait Timeout | Not supported. |
| ||
71 | PING Data Length | Not supported. |
| ||
77 | Telnet Escape Character | Not supported. |
| ||
78 | Telnet Starting Terminal Type | Not supported. |
| ||
79 | Graceful TCP Shutdown (bitmapped) | Not supported. The DART 300 always | |||
|
| attempts graceful shutdown of TCP sessions. | |||
82 | Friends Only and UDP Controls (bitmapped) | Friends Only and UDP Controls | |||
| (Service Provider Mode) | The features are available with various | |||
|
| ||||
|
| commands as follows: |
| ||
|
| b0 | = | +WVFRIEND= (friends only) | |
|
| b1 | = not supported |
| |
|
| b2 | = +WS217 | (UDP receive lock) | |
|
| b3 | = not supported |
| |
|
| b4 | = not supported |
| |
|
| Client sessions only support traffic with the | |||
|
| destination server. |
|
2110291 Rev 1.0 | Page 32 |