DART 300 Migration Guide | Comparative AT Command Reference | |
Table |
| |
|
|
|
Register | DART 200 | DART 300 |
|
|
|
83 | UDP Receive Lock Timer (Service Provider | UDP Receive Lock Timer |
| Mode) | Supported as +WS217. |
|
| |
85 | TCP | Not supported. |
86 | Telnet/TCP Keep Alive Timeout | Not supported. The DART 300 uses S30 for |
|
| timing out UDP/TCP sessions. |
100 | RF channel currently being reported (may not | Not supported. The current channel can be |
| be acquired) | read from +WS200. |
101 | CDPD Available Flag | Not supported. The normalized signal |
|
| strength is available from +WS50. If it is 0, |
|
| there is no CDPD signal available. The |
|
| modem may be scanning for another CDPD |
|
| channel. |
102 | Mean RSSI in dBm. | Not supported. The RSSI can be obtained |
|
| with +WPRSSI. |
103 | Current Transmit Power Level | Not supported. |
104 | MDBS Power Product | Not supported. |
106 | Current SER in % | Not supported. |
107 | Current LASI/WASI | Not supported. |
108 | Current SPNI | Not supported. The SPNI is available using |
|
| +WCID |
109 | Current CSI | Not supported. |
110 | Current Cell Number | Not supported. The Cell Number is available |
|
| from +WS210. |
111 | Current Color Code | Not supported. |
112 | Current Transmit BLER in % | Not supported. |
113 | Current Symbols in Error (SIE) | Not supported. |
114 | Current SPI | Not supported. |
| Various Statistics | Not supported. |
126 | Registration Protocol States | Not supported. These states are included in |
|
| the Registration Status reported in +WS201. |
2110291 Rev 1.0 | Page 33 |