Sierra Wireless 300 manual +WS70=20

DART 300 Migration Guide		Sample Configurations
Table 2-4 Host TCP Setup (client) (continued)
DART 200 Command	DART 300 Equivalent	Description
\Q2 (default)	N/A	Use hardware flow control (RTS/CTS). The
		DART 300 supports only this flow control.
\T1 (default)	+WS70=20	Timed data forwarding (always used with binary
		data). The DART 200 configuration assumes use
		of the default value in S50 (20 tenths of a second).
*B0 (default)	N/A	Disable broadcast reception.
*C1 (default)	N/A	Enable SLIP TCP header compression.
*G1 (default)	N/A	Multicast address selection.

2110291 Rev 1.0 Page 9