Connections❶ ❷ ❸ ❹ ❺ ❻
❼ ❽
Inputs ❶HDMI 1
HDMI 2
Accept both HDMI and DVI digital video inputs.
❷Components/RGB-HV Four RCA connectors. They accept both standard
and high-definition component (YPrPb) and
RGB-HV signals. Also used as RGB input for SCART
RGBS signals.
❸Video One RCA connector. Accepts composite video sig-
nals. Also used as composite sync input for SCART
RGBS signals.
❹Graphics RGB One D-Sub 15-pin female connector. Accepts
component or RGB high-definition signals.
Control/
Service
❺USB USB 1.1 (type B) port for serial commands and
firmware upgrade.
❻RS-232 RS232 (female D-Sub 9-pin) port for serial
commands and firmware upgrade.
Outputs ❼TRIG 1 12 V 100 mA max output, for motorized screen
control. Activates when the projector is switched
on.
TRIG 2 12 V 100 mA max output, for motorized screen
masking systems control. See “Screen” on page
27.
TRIG 3 12 V 100 mA max output, for motorized ana-
morphic lens position control. See “Anamorphic
Lens” on page 27.
❽3D Sync OUT VESA DIN-3 connector for 3D IR Emitter cable.
2 Overview Nero 3D
User Guide
11