Setting Up |
Creating a New Macro
Follow these steps to create a new macro:
1.Press 
or 
to select NEW.
2.Press 
.
3.Press the device key you want to use for this macro (for example TV), and then press any key to define as the macro key. You hear three beeps to indicate that macro creation mode has started.
Note: If you select a key that already has a macro stored in it, the new macro will replace the old macro.
4.Press the key or button sequence that you want to record.
5.Press YES 
. You enter the Delay and Save screen. Do one of the following:
•Enter the number of seconds you want to delay between each command. For example, if you want a six second delay between turning on your TV and then turning on your VCR, press ‘6’.
•Press YES 
to save the macro and exit macro creation mode.
The following steps shows how to record a macro that turns on your TV, switches the TV to DVD viewing mode, turns on the DVD, and plays a DVD. Create other macros to suit your needs.
1. | Press the EXIT | and YES | 9. | Press the DVD device button | |
buttons to enter the SETUP mode. |
|
|
| ||
2. | Press or | to select MACRO. | 10. | Press YES | to select a time delay |
|
|
|
| sec) for each step. (Press '0' on the | |
|
|
|
| screen to select 10 seconds.) | |
3. | Press OK to enter the MACRO | 11. | Press the DVD power button | ||
menu. |
|
|
|
| |
4. | Press OK to enter the NEW menu. | 12. | Press the DVD play key. | ||
5. | Press OK to enter the SET KEY | 13. | Press Yes | To save the macro | |
menu. |
|
|
|
| |
6. | Press the TV device button | 14. | Press Yes | to exit the MACRO mode | |
7. | Press the TV power button | 15. | Press EXIT | twice to exit the SETUP | |
|
|
|
| menu and return to the main menu. | |
8. | Press the TV/Video key |
|
|
| |
19
