Sima Products SUR-47 user manual Learning from Another Remote Control

Getting Started SUR-47 User’s Manual

Learning from Another Remote Control

Before using learning mode, set both remotes on a flat surface so that the device’s remote control IR is pointed at the SUR-47’s learning eye, which is located at the bottom of the unit.

1.Press or to select LEARN.

2.Press .

3.Point the target device's remote control at the SUR-47 learning eye located at the base of the unit (see Figure 1A: SUR-47 Front View).

4.Press the button corresponding to the target device.

The SUR-47 Touch Screen sequentially displays screens corresponding to first the hard keys, then page one of the soft keys, and finally page two of the soft keys. The blinking rectangle denotes the key being learned.

5.Press the corresponding button of the target device's remote control.

The SUR-47 screen displays an OK message if the code was successfully learned or an ERROR message if the code was not learned.

Press PAGE to toggle between hard and soft key displays.

Note: When the remote has learned the last button on the page, the next page is automatically displayed.

6.Press EXIT to exit learning mode.

14