Slick V3.3 manual Xedit Line Commands, Ispf Exclude Lines X and XX for blocks

ISPF Line Commands

UC [n], specifies that the line and the subsequent n-1lines are to be converted. The second (block) form (UCUC or UCC) is placed on the first and last lines of the block to be converted.

See Also

ispf_caps, ISPF Line Command Lowercase, lowcase, upcase

ISPF Exclude Lines X and XX for blocks

Usage

•X [n] - Exclude n lines starting with the line with the command.

•XX - Exclude a block of lines, must match another XX.

Remarks

Specifies one or more lines to be hidden (excluded). There are two forms to this command. The first form (X [n]) specifies that the line and the subsequent n-1lines are to be excluded. The second (block) form (XX) is placed on the first and last lines of the block to be excluded.

See Also

ispf_exclude, ispf_reset, ISPF Line Command First, ISPF Line Command Last, ISPF Line Com- mand Show

ISPF Select Lines Z and ZZ for blocks

Usage

•Z [n] - Select n lines starting with the line with the command.

•ZZ - Select a block of lines, must match another ZZ.

Remarks

Select a block of lines. There are two forms to this command. The first form (Z [n]) specifies that the line and the subsequent n-1lines are to be selected. The second (block) form (ZZ) is placed on the first and last lines of the block to be selected.

See Also

ispf_cut, ispf_paste

XEDIT Line Commands

The following XEDIT line commands are supported and override the like-named ISPF commands when there is a conflict. XEDIT commands can be enabled using the ISPF Options dialog box (Window → Preferences, expand SlickEdit and click General in the tree, then double-click the ISPF Options set- ting).

Table 11.9. XEDIT Line Commands

516