Xerox 6300, 6350, 8500, 8550 manual Phaser PJL Commands, PJL Command Values Description

Phaser PJL Commands

Phaser PJL Commands

The following table lists the most commonly used HP PJL and Xerox-unique PJL commands.

See also:

HP Printer Job Language Technical Reference for the standard set of PJL commands.

PJL Command	Values	Description
@PJL FSDELETE NAME=“pathname”	*	Deletes a file from the internal
		hard drive.
@PJL FSDIRLIST NAME=“pathname”	*	Lists PJL system files and
		directories.
@PJL FSDOWNLOAD FORMAT:BINARY	*	Downloads a file to the internal
SIZE=size NAME=“pathname”		hard drive.
@PJL FSINIT VOLUME=value	*	Initializes the internal hard drive.
@PJL FSMKDIR NAME=“pathname”	*	Creates the specified directory
		on the internal hard drive.
@PJL FSUPLOAD NAME=“pathname”	*	Uploads file from the printer to
		the host.
@PJL USTATUS	*	Allows the printer to send
		unsolicited status messages for
		device status changes,
		end-of-job status, and pages
		printed. Status can be sent at
		specified time intervals.
@PJL USTATUSOFF	n/a	Turns off all status responses.
@PJL FSAPPEND	n/a	Appends data to an existing file,
		or if the file doesn’t exist, creates
		the file and loads it with the given
		data.

@PJL XCLIENTJOBID=value	Exactly 48 bytes
	(first byte is 8 and
	the 8 last bytes
	represent a time in
	the format
	hhmmsshs.

Sets the client job id used with PrintingScout.

@PJL XJAFILENAME=“filename”	Roman-8	Sets the file name for Job
	characters	Accounting.
	1-255
@PJL XJAHOSTNAME=“hostname”	Roman-8	Sets the host name for Job
	characters	Accounting.
	1-255
@PJL XJAJOBNAME=“jobname”	Roman-8	Sets the job name for Job
	characters	Accounting.
	1-255

System Administrator Guide

B-8