Xerox 6300, 6350, 8500, 8550 manual System Administrator Guide 4-17, Configuring SNMP

Configuring SNMP

The Administrative User Account section displays the following information:

■User Name: Displays the Administrative User account name defined on the

Configure SNMP v3: Administrative User Account page.

■Authentication Key: Displays a row of asterisks (*) if the Hide Typing check box is

selected on the Configure SNMP v3: Administrative User Account page. Displays the Authentication Key if the Hide Typing check box is cleared.

■Privacy Key: Displays a row of asterisks (*) if the Hide Typing check box is selected

on the Configure SNMP v3: Administrative User Account page. Displays the Privacy Key if the Hide Typing check box is cleared.

■SNMP Read: Displays a check symbol if SNMP Read access is enabled for the Administrative User Account.

■SNMP Write: Displays a check symbol if SNMP Write access is enabled for the Administrative User Account.

The Key User Account section displays the following information:

■User Name: Displays the Key User Account name defined on the Configure SNMP

v3: Key User Account page.

■Authentication Key: Displays a row of asterisks (*) if the Hide Typing check box is

selected on the Configure SNMP v3: Administrative User Account page. Displays the Authentication Key if the Hide Typing check box is cleared.

■Privacy Key: Displays a row of asterisks (*) if the Hide Typing check box is selected

on the Configure SNMP v3: Administrative User Account page. Displays the Privacy Key if the Hide Typing check box is cleared.

■SNMP Read: Displays a check symbol if SNMP Read access is enabled.

■SNMP Write: Displays a check symbol if SNMP Write access is enabled.

Note: SNMP Read and SNMP Write access for the Any User account must be equal to or less than the read and write access privileges set for the Key User account. Once the Key User account is created, if the Any User account is set to have read and/or write access, but the Key User account access is not set, the Key User account is set with the same access privileges as the Any User account by default. Similarly, if the Key User account does not have SNMP Write access, the Any User account cannot be set with write access.

The Any User/Driver Account section displays the following information:

■User Name: Displays anyuser by default and cannot be changed.

■SNMP Read: Displays a check symbol if SNMP Read access is enabled. SNMP Read access can be enabled for the Any User account after the Key User account is created.

■SNMP Write: Displays a check symbol if SNMP Write access is enabled. SNMP Write access can be enabled for the Any User account after the Key User account is created.

■Driver Account Enabled: Displays a check symbol if the Driver Account is enabled (default).

Note: If the Driver Account is disabled, it breaks communication between the printer and any applications using SNMP v3, such as Xerox printer drivers and PrintingScout. For a complete list of applications disabled, see Disabling SNMP on page 4-19.

System Administrator Guide

4-17