Xerox 6300, 6350, 8500, 8550 manual Phaser PJL Commands

		Phaser PJL Commands
PJL Command	Values	Description
@PJL XJAUSERNAME=“username”	Roman-8	Sets the user name for Job
	characters	Accounting.
	1-255
@PJL XJOBPASSWORD=value	4-digit string (1-9)	Assigns the job password used
		by Secure Print.
@PJL XPERSONALJOB	n/a	Starts a Personal Print job.
@PJL XPROOFJOB	n/a	Starts a Proof Print job.
@PJL XSAVEDJOB	n/a	Starts a Saved Print job.
@PJL XSECUREJOB	n/a	Starts a Secure Print job.
@PJL XIGNOREFF	ON, OFF	Ignores FormFeed commands
		when printing PCL blank pages.
@PJL XLINETERMINATION=value	ON, OFF	Terminates a line.
@PJL XMBFSIZE=value	ANY or any	Sets the media size for Tray 1.
	supported media
	size, such as
	LETTER,
	STATEMENT, and
	EXECUTIVE.
@PJL XMEDIASOURCE=value	ANY, TRAYn	Sets the media source.
@PJL XMEDIATYPE=value	ANY or any	Sets the media type.
	supported media
	type, such as
	PAPER and
	LABEL.
@PJL XPCLTRAYSWITCH=value	ON, OFF	Switches trays when a tray goes
		empty. If AutoSelect is chosen as
		the paper source (tray) in PCL,
		then tray switching is always
		active, regardless of the value.
		When the current tray goes
		empty, the printer attempts to
		switch to another tray containing
		the same size and type of paper.
		This command only takes effect
		when a specific tray, such as
		Tray 2, is selected in the job.
		When this command is ON, tray
		switching still occurs when the
		tray goes empty. When this
		command is OFF, no switching
		occurs and the user is prompted
		to load paper.

System Administrator Guide

B-9