Xerox 6300, 6350, 8500, 8550 System Administrator Guide 3-7, Protocol Control, Select Port

Models: 6300, 6350, 8500, 8550

1 86
Download 86 pages 41.78 Kb
Page 22
Image 22

Protocol Control

8.If you selected Off, follow the instructions in the TCP/IP Settings section to manually enter the printer’s TCP/IP information.

Enter the TFTP server IP address or hostname in the TFTP Server Name field.

Enter the pathname of the configuration file in the Boot File Name field.

9.Under DDNS/WINS Settings, in the DDNS box, select one of the following:

On: The printer registers its IP name and address so other devices on the network can refer to it by name.

Off: The printer does not register its IP name and address. If DDNS is Off, these values may be set by BOOTP/DHCP if enabled.

10.If you selected On, follow the instructions in DDNS/WINS Settings to manually enter settings to identify the printer. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

11.Click the Save Changes button.

12.If prompted, enter your Admin or Key User name and password.

Port 9100

To change Port 9100 settings:

1.Launch your web browser.

2.Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.Click Properties.

4.Select the Protocols folder on the left sidebar.

5.Select Port 9100.

6.If prompted, enter your Admin or Key User name and password.

7.Select On or Off in the Port 9100 box.

8.If you selected On, follow the instructions on the page to select Port 9100 settings. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

9.Click the Save Changes button.

10.If prompted, enter your Admin or Key User name and password.

LPR

To change LPR settings:

1.Launch your web browser.

2.Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.Click Properties.

4.Select the Protocols folder on the left sidebar.

5.Select LPR.

6.If prompted, enter your Admin or Key User name and password.

7.Select On or Off in the LPR box.

System Administrator Guide

3-7

Page 22
Image 22
Xerox 6300, 6350, 8500, 8550 manual System Administrator Guide 3-7, Protocol Control, Click Properties, Select Port