Xerox 6300, 6350, 8500, 8550 Configuring SNMP, System Administrator Guide 4-16, Click Properties

Models: 6300, 6350, 8500, 8550

1 86
Download 86 pages 41.78 Kb
Page 45
Image 45

Configuring SNMP

2.Do one of the following:

To add traps for SNMP v1v2c, click the Add Destination button, and then go to Step 3.

To edit the settings for a Trap Destination Address, click the corresponding Edit button, and then go to Step 3.

To delete a Trap Destination Address, click the corresponding Delete button.

3.To add or edit a Trap Destination IP Address, click the IP Address radio button, and then enter the IP Address in the fields.

4.To add or edit a Trap Destination DNS Name, click the DNS Name radio button, and then enter the DNS Name in the field.

5.For a non-standard UDP port, enter the UDP Port Number in the field.

6.Select the SNMP trap version to send to the specified address. SNMP versions include SNMP v1 Traps (default), SNMP v2c Traps, and SNMP v2c Inform Requests.

SNMP v1 Traps is the default.

7.Enter the community name of the destination device in the Community Name field.

8.For Traps to be received, select the check boxes of the different types of traps to send to the specified address. Traps to be received include Printer Traps (default), Job Monitoring Traps, Cold Start Traps, and Authentication Traps. At least one trap type must be selected.

9.Click the Apply button to save the changes.

10.If prompted, enter your Admin or Key User name and password.

Configuring SNMP v3

When configuring SNMP v3, you can set up:

Admin and Key User accounts with Privacy and Authentication Keys associated with each account.

SNMP user read and write access.

An access control list that limits SNMP printer access to the specific hosts. See Configuring the SNMP Access Control List on page 4-18.

To configure and enable SNMP v3:

1.Launch your web browser.

2.Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.Click Properties.

4.Select the Protocols folder on the left sidebar.

5.Select SNMP.

6.If prompted, enter your Admin or Key User name and password.

7.On the SNMP Configuration page, click the Configure SNMP v3 button.

The current settings for the SNMP v3 Administrative User, Key User, and Any User/Driver accounts display.

System Administrator Guide

4-16

Page 45
Image 45
Xerox 6300, 6350, 8500, 8550 manual Configuring SNMP, System Administrator Guide 4-16, Click Properties