Getting Started

Sources for More Information

 

Sources for More Information

 

This guide covers features related to IPv6 operation in software release

 

K.13.01, and includes an IPv6 command index on page xi.

 

For information about switch operation and features not covered in this guide,

 

refer to the switch publications listed in this section.

 

 

N o t e

For the latest version of all ProCurve switch documentation referred to below,

 

including Release Notes covering recently added features, visit the ProCurve

 

Networking web site at www.procurve.com, click on Technical support, and then

 

click on Product Manuals (all).

 

■ Software Release Notes—Release Notes are posted on the ProCurve

 

 

Networking web site and provide information on new software updates:

■

■

•new features and how to configure and use them

•software management, including downloading software to the switch

•software fixes addressed in current and previous releases

Product Notes and Software Update Information—The printed Read Me First shipped with your switch provides software update information, product notes, and other information.

Installation and Getting Started Guide—Use the Installation and Getting Started Guide shipped with your switch to prepare for and perform the physical installation. This guide also steps you through connecting the switch to your network and assigning IP addressing, as well as describing the LED indications for correct operation and trouble analysis.

■Management and Configuration Guide—Use this guide for information on topics such as:

•various interfaces available on the switch

•memory and configuration operation

•interface access

•IP addressing

•time protocols

•port configuration, trunking, traffic control, and PoE operation

•Redundant management

•SNMP, LLDP, and other network management topics

•file transfers, switch monitoring, troubleshooting, and MAC address management

1-4