HP IPv6 5400zl, IPv6 6200yl, IPv6 2900, IPv6 3500yl manual IPv6 Addressing

IPv6 Addressing

Address Types and Scope

In binary notation, the fixed prefix for link-local prefixes is:

1111 1110 10 = fe80/10

For more on link-local addresses, refer to “Link-Local Unicast Address” on page 3-13.

Routable Global Unicast Prefix. This well-known 3-bit fixed-prefix indi- cates a routable address used to identify a device on a VLAN interface that is accessible by routing from multiple networks. The complete prefix is 64 bits, followed by a 64-bit interface identifier. For example, the leading 2 in the first octet of the following address illustrates a global unicast address:

2001:db8:260:212:215:60ff:fe7a:adc0/64

In binary notation, the fixed prefix in this example appears as follows:

0010 0000 = 20/3

Unique Local Unicast Prefix (fd). This well-known fixed prefix is defined as FC00/7. However, the eighth high-order bit must also be set to 1, resulting in a fixed prefix of fd00/8. (In the future, setting the eighth high-order bit to zero may become an option.) This prefix signifies a routable address intended for use within the boundaries of a site or organization. For example, the leading fd in the first octet of this address illustrates a unique local unicast address intended to be used in a privately defined network.

fd00:00ff:0C00:000a:215:60ff:fe7a:adc0

Unique local unicast addresses are described in more detail under "Unique Local Unicast IPv6 Address" on page 3-19.

Multicast Prefix (ff). This well-known 8-bit fixed prefix signifies a perma- nent or temporary multicast address. The second 8 high-order bits are used for flags and scope for the multicast address. The remaining 112 bits define the multicast group identifier. For example:

ff02::1:ffc7:b5b9

For more information, refer to “Multicast Application to IPv6 Addressing” on page 3-21.

3-12