HP IPv6 6200yl, IPv6 2900, IPv6 5400zl, IPv6 3500yl manual T e

IPv6 Management Security Features

Secure Shell for IPv6

Syntax:. [no] ip ssh

Enables SSH on the switch and activates the connection with a configured SSH server (RADIUS or TACACS+). To disable SSH on the switch, enter the no ip ssh com- mand.

[ip-version < 4 6 4or6 >]

IP version used for SSH connections on the switch:

4 accepts SSH connections only from IPv4 clients.

6 accepts SSH connections only from IPv6 clients. 4or6 accepts SSH connections from either IPv4 or IPv6 clients. (Default: 4or6).

To disable SSH connections with IPv4 clients, enter the ip ssh ip-version 6 command; to disable SSH connections with IPv6 clients, enter the ip ssh ip-version 4 command.

[port < 1-65535 default >]

TCP port number used for SSH sessions in IPv4 and IPv6 connections (Default: 22).

Valid port numbers are from 1 to 65535, except for port numbers 23, 49, 80, 280,443, 1506, 1513 and 9999, which are reserved for other subsystems.

[timeout < 5 - 120 >]

Timeout value allowed to complete an SSH authentica- tion and login on the switch (Default: 120 seconds).

[filetransfer]

	Enables SSH on the switch to connect to an SCP or SFTP
	client application to transfer files to and from the
	switch over IPv4 or IPv6.
	For more information, see “Secure Copy and Secure
	FTP for IPv6” on page 6-18.
N o t e	As with IPv4, the switch only supports SSH version 2. You cannot set up an
	SSH session with a client device running SSH version 1.
	For complete information on how to configure SSH for encrypted, authenti-
	cated transactions between the switch and SSH-enabled client devices, refer
	to the “Configuring Secure Shell (SSH)” chapter in the Access Security
	Guide.

6-16