HP IPv6 2900 IP Preserve for IPv6, Show snmpv3 targetaddress Command Output with IPv6 Address

IPv6 Management Features

IP Preserve for IPv6

The show snmpv3 targetaddress command displays the configuration (including the IPv4 or IPv6 address) of the SNMPv3 management stations to which notification messages are sent.

ProCurve(config)# show snmpv3 targetaddress
snmpTargetAddrTable [rfc2573]
Target Name	IP Address	Parameter
-------------------------	----------------------	---------------------------
1	15.29.17.218	1
2	15.29.17.219	2
PP.217	15.29.17.217	marker_p
PP.218	2620:0:260:211
	:217:a4ff:feff:1f70	marker_p

An IPv6 address is displayed on two lines.

Figure 5-9. “show snmpv3 targetaddress” Command Output with IPv6 Address

IP Preserve for IPv6

IPv6 supports the IP Preserve feature, which allows you to copy a configura- tion file from a TFTP server to multiple switches without overwriting the IPv6 address and subnet mask on VLAN 1 (default VLAN) in each switch, and the Gateway IPv6 address assigned to the switch.

To configure IP Preserve, enter the ip preserve statement at the end of the configuration file that will be downloaded from a TFTP server. (Note that you do not invoke IP Preserve by entering a command from the CLI).

5-23