HP IPv6 2900, IPv6 6200yl, IPv6 5400zl, IPv6 3500yl manual Syntax show run

IPv6 Addressing Configuration

View the Current IPv6 Addressing Configuration

ProCurve(config)#	show ipv6 vlan 10
Internet (IPv6) Service
IPv6 Routing	: Disabled
Default Gateway	: 10.0.9.80
ND DAD	: Enabled
DAD Attempts	: 3
Vlan Name	: VLAN10
IPv6 Status	: Enabled

IPv6 Address/Prefixlength	Expiry
-------------------------------------------	-------------------------
2620:0:a03:e102::127/64	Wed	Jan 23	14:16:17	2008
2620:0:a03:e102:212:79ff:fe88:a100/64	Sat	Jan 5	05:02:22	2008
fe80::127/64	permanent

Figure 4-2. Example of Show IPv6 VLAN < vid > Output

Syntax: show run

In addition to the other elements of the current configuration, this command lists the statically configured, global unicast and anycast IPv6 addressing, and the current IPv6 configura- tion per-VLAN. The listing may include one or more of the following, depending on what other IPv6 options are config- ured on the VLAN. Any stateless address autoconfiguration (SLAAC) commands in the configuration are also listed in the output, but the actual addresses resulting from these commands are not included in the output.

■ipv6 enable

■ipv6 address fe80::< device-id> link-local

■ipv6 address < prefix >:< device-id >/< prefix-length >

■ipv6 address autoconfig

■ipv6 address dhcp full [rapid-commit]

■ipv6 < global-unicast-address >/< prefix > anycast

4-25