HP IPv6 5400zl, IPv6 6200yl manual Configuring MLD, Enabling or Disabling MLD Snooping on a Vlan

Multicast Listener Discovery (MLD) Snooping

Configuring MLD

Configuring MLD

Several CLI commands are available for configuring MLD parameters on a switch.

Enabling or Disabling MLD Snooping on a VLAN

Syntax: [no] ipv6 mld

Note: This command must be issued in a VLAN context.

This command enables MLD snooping on a VLAN. Enabling MLD snooping applies the last-saved or the default MLD configuration, whichever was most recently set.

The [no] form of the command disables MLD snooping on a

VLAN.

MLD snooping is disabled by default.

For example, to enable MLD snooping on VLAN 8:

ProCurve# config

ProCurve(config)# vlan 8

ProCurve(vlan-8)# ipv6 mld

To disable MLD snooping on VLAN 8:

ProCurve(vlan-8)# no ipv6 mld

7-8