HP IPv6 5400zl, IPv6 6200yl, IPv6 2900, IPv6 3500yl manual Viewing IPv6 Router Information

IPv6 Addressing Configuration

View IPv6 Gateway, Route, and Router Neighbors

ProCurve(config)# show ipv6 route

IPv6 Route Entries

Dest : ::/0		“Unknown” Address						Type : static
Gateway : fe80::213:c4ff:fedd:14b0%vlan10							Dist. : 40	Metric : 0
Dest : ::1/128								Type : connected
			Loopback Address
Gateway :	lo0						Dist. : 0	Metric : 1
Dest : 2001:db8:a03:e102::/64								Type : connected
						Global Unicast Address
Gateway : VLAN10						Configured on the Switch	Dist. : 0	Metric : 1
Dest : fe80::%vlan10								Type : connected
					Link-Local Address
Gateway : VLAN10							Dist. : 0	Metric : 1
					Configured on the Switch
Dest : fe80::1%lo0								Type : connected
				Link-Local Address Assigned
Gateway :	lo0						Dist. : 0	Metric : 1
					to the Loopback Address

Figure 4-4. Example of Show IPv6 Route Output

Viewing IPv6 Router Information

Syntax: show ipv6 routers [ vlan < vid > ]

This command lists the switch’s IPv6 router table entries for all VLANs configured on the switch or for a single VLAN. This output provides information about the IPv6 routers from which routing advertisements (RAs) have been received on the switch.

vlan < vid >: Optional. Specifies only the information on IPv6 routers on the indicated VLAN.

Router Address: The IPv6 address of the router interface.

Preference: The relative priority of prefix assignments received from the router when prefix assignments are also received on the same switch VLAN interface from other IPv6 routers.

Interface: The VLAN interface on which the path to the router exists.

4-30