HP IPv6 2900, IPv6 6200yl, IPv6 5400zl, IPv6 3500yl manual Displaying an SSH Configuration, Inactive

IPv6 Management Security Features

Secure Shell for IPv6

Displaying an SSH Configuration

To verify an SSH for IPv6 configuration and display all SSH sessions running on the switch, enter the show ip ssh command. Information on all current SSH sessions (IPv4 and IPv6) is displayed.

ProCurve(config)# show ip ssh

SSH enabled		: Yes
TCP Port Number	: 22
Timeout (sec)	: 120
Secure Copy Enabled		: Yes
IP Version		: IPv4orIPv6

Displays the current SSH configuration and status.

The switch uses these five SSH settings internally for transactions with clients.

Here SSH is enabled for IPv4 and IPv6 clients.

Ses	Type	Source IP	Port
---	------	+ ----------------------------	-----
1	console
2	ssh	192.168.31.114	1722
3	telnet		With SSH running, the switch supports one console
4	inactive
			session and up to five other SSH and Telnet (IPv4
			and IPv6) sessions.

Web browser sessions are also supported, but are not displayed in show ip ssh output.

Source IPv6 IP addresses of SSH clients are displayed in hexadecimal format.

6-17