HP IPv6 6200yl, IPv6 2900, IPv6 5400zl manual Syntax copy source tftp ipv6-addr filename pc unix

IPv6 Management Features

TFTP File Transfers Over IPv6

■flash < primary secondary >: Copies a software file stored on a remote host to primary or secondary flash memory on the switch. To run a newly downloaded software image, enter the reload or boot system flash command.

■pub-key-file:Copies a public-key file to the switch.

■startup-config:Copies a configuration file on a remote host to the startup configuration file on the switch.

.

Syntax: copy <source > tftp < ipv6-addr> < filename > < pc unix >

Copies (uploads) a source data file on a switch that is enabled with TFTP server functionality to a file on the TFTP server at the specified IPv6 address, where <source> is one of the following values:

■

■

■

command-output < cli-command >: Copies the output of a CLI command to the specified file on a remote host.

config < filename >: Copies the specified configuration file to a remote file on a TFTP server.

crash-data < slot-id master >: Copies the contents of the crash data file to the specified file path on a remote host. The crash data is software-specific and used to deter- mine the cause of a system crash. You can copy crash information from an individual slot or from the master crash file on the switch.

■crash-log < slot-idmaster >: Copies the contents of the crash log to the specified file path on a remote host. The crash log contains processor-specific operational data that is used to determine the cause of a system crash. You can copy the contents of the crash log from an individual slot or from the master crash log on the switch.

■

■

■

■

event-log:Copies the contents of the Event Log on the switch to the specified file path on a remote host.

flash < primary secondary >: Copies the software file used as the primary or secondary flash image on the switch to a file on a remote host.

startup-config:Copies the startup configuration file in flash memory to a remote file on a TFTP server.

running-config:Copies the running configuration file to a remote file on a TFTP server.

5-18