Slick V3.3 manual Auto Enable Properties Dialog

Auto Enable Properties Dialog

The following settings are available:

•Requires editor control - Indicates that this command should be enabled only if operating on an editor control.

•Allow in read only mode - Indicates that this command should be enabled if the editor control is in strict read only mode.

•Allow when window is iconized - Indicates that this command should be enabled if the editor control is an editor window which is iconized.

•Requires selection in active buffer - Indicates that this command should be disabled if there is no se- lection in the active buffer.

•Requires Context Tagging® - Indicates that this command should be disabled if Context Tagging does not support the current buffer language type.

•Requires fileman mode - Indicates that this command should be disabled if the current buffer is not in Fileman mode.

•Requires unicode buffer - Indicates that this command should be disabled if the current buffer is not Unicode.

•Allow in non-MDI editor control - Indicates that this command should be allowed in a non-MDI editor control.

•Requires block selection - Indicates that this command should be disabled if there is no selection or the current selection is not a type of block or column.

367