SMC Networks BLW-54MF manual Ms-Dos

2. MS-DOSwindow will appear.

3.Type ipconfig after the command of c:> and then press enter.

4.MS-DOS will appear your NIC address in the window, please take notice

of the value of	IP Address and Default Gateway.
5.The value of	Default Gateway is the IP address of BLW-54MF.

Windows2000/XP

1.Please make sure that you do have the authority to access as an

Administrator		or you are already one of the		System Administrators.
2.Click	Start	Programs	Accessories	Command Prompt or
Start	RunĀ,	and then type in cmd.exe		and press enter.
3.It will appear a		MS-DOS	window.
4.Type	ipconfig	after the command of c:>		and then press enter.

5.MS-DOS will appear your NIC address in the window, please take notice

of the value of IP Address and	Default Gateway.
6.The value of Default Gateway	is the IP address of BLW-54MF.

Linux / Unix-Like

1.At first please make sure that your NIC are already enabled and works

properly.

2.And be sure you have root number or your already are one of the

members of a root group.

3.Please type ifconfig of ifconfig -aafter # and then press enter.

4.It will appear your present NIC address in the window, please take notice

of the value of	IP Address	and	Gateway.
5.The value of	Gateway is the IP address of BLW-54MF.
If you can get	IP Address	and	Gateway, normally, it means that

you may use web browser to configure BLW-54MF. Type your destination http://192.168.1.1 (default IP Address of BLW-54MF) on the Address Bar in the web browser. If you have changed the default IP Address of BLW-54MF, please type in the new address on the address bar.

Chapter 2 Basic Setup & Configuration

2

9