SMC Networks BLW-54MF manual 3Advanced Setup & Configuration Routing, Static

3Advanced Setup & Configuration 3

1.Routing

1.1Static

If you connect several routers with BLW-54MF Wireless Router, you may need to set up a predefined routing rule to have more effective network topology/traffic. To set Static Route, please enter the IP address of the route, route mask, route gateway, and choose the route interface from LAN or WAN.

Network Address Enter the IP address of the destination LAN

segment which needs routing. When a packet with destination IP address

that matches to this field, it will route to the device set in the route

gateway field.

Network Mask Enter the Route Subnet Mask of the destination LAN

segment. It should be a C class LAN segment.

GateWay Enter the Route GateWay of the destination LAN segment.

Interface You can use the LAN side or the WAN side to be the

physical interface, which is the location where the packets sending out.

45

Chapter 3 Advanced Setup & Configuration