CONFIGURING YOUR
OFFICECONNECT
NETBUILDER 10
BRIDGE/ROUTER
This guide contains the information you need to install and configure your OfficeConnect® NETBuilder® 10 bridge/router.
The basic configuration that you will establish is shown in Figure 1. This configuration supports a
As you are configuring your router, you will be asked to make choices based on what is required on your network.
Figure 1 Basic Configuration
Network management system
|
| Office A |
IP 10.1.0.0 |
| IPX = AAA |
|
| |
OfficeConnect |
|
|
bridge/router |
|
|
|
| Leased line |
|
| IPX = CCC |
ISDN |
| IP = unnumbered |
|
| |
|
| OfficeConnect |
| ISDN | bridge/router |
ISP |
| |
|
| |
Internet |
|
|
| IP 20.1.0.0 | Office B |
|
| IPX = BBB |
Network management system
