Preconfiguration Set Up

7

Preconfiguration Set Up

This section describes the things you need to do before performing the actual network configuration.

Set Up the NMS as a DHCP Client

Refer to the documentation that came with your PC operating system for information on how to perform this set up.

Install the OfficeConnect on a Tabletop

Attach the plastic feet supplied with your OfficeConnect bridge/router; see Figure 2.

CAUTION: Do not restrict air flow around the sides and back of the bridge/router.

Figure 2 Attaching Plastic Feet to OfficeConnect

Bridge/Router

Remove feet from their adhesive backing.

Attach feet to the bottom of the chassis, using the semi-circle marks for placement.

Cable the Bridge/Router

Figure 3 shows the back panel connectors on the OfficeConnect bridge/routers. Refer to this figure when you attach or plug in cables.

Page 7
Image 7
3Com 09-1632-000 manual Preconfiguration Set Up, Set Up the NMS as a Dhcp Client, Install the OfficeConnect on a Tabletop