Configuration Procedure | 23 |
Configuring IPX Network Addressing
Use this procedure when you use IPX as your network protocol. If you use IP as your network protocol, go to “Configuring IP Network Addressing” on page 20.
To configure IPX network addressing, follow these steps:
1Return to the Web Link home page, click Web Link in the banner.
2In the Web Link navigation frame, click the Configuration link.
3In the
4Specify an IPX network number and header format.
a In the Basic IPX section on the navigation frame, click the IPX NETnumber link.
b In the start field, choose 1.
c In the NETnumber field, enter the IPX network number for the Ethernet LAN. For example, enter:
&AAA eth d Click Apply.
e In the start field, choose 4.
f In the NETnumber field, enter the IPX network number for the WAN interface. For example, enter
&CCC ppp g Click Apply.
5Enable IPX Routing.
a In the Basic IPX section of the navigation frame, click the IPX CONTrol link.
b In the start field, choose 1.
c In the CONTrol field, choose ROute. d Click Apply.
e In the start field, choose 4.
