Configuration Procedure | 25 |
bIn the AuthRemoteUser field, enter the username and password for office B (the office remote from you) in quotes. For example, enter:
"OfficeB" "passwordB"
cClick Apply.
6Enable port control to establish PPP connectivity using access security.
a In the Dial on Demand Dynamic Dial section of the navigation frame, click the PORT CONTrol link.
b In the start field, choose 4.
c In the CONTrol field, choose Enabled. d Click Apply.
Continue with the Office B configuration.
Office B Configuration
When you or someone else is setting up Office B, all the configuration steps in the guide need to be performed on the OfficeConnect NETBuilder bridge/router located in that office. Then at the Office B location, the user names and passwords must be entered to establish remote access security.
For remote access security at Office B, assign passwords and usernames to your OfficeConnect network.
To configure PPP authentication for office B, follow these steps:
1Return to the Web Link home page by clicking Web Link in the banner.
2In the navigation frame, click the Configuration link.
3In the navigation frame, click the IP Routing link.
4In the Dial on Demand Dynamic Dial section of the navigation frame, click the PPP AuthLocalUser link.
a In the start field, choose 4.
