Configuration Procedure | 17 |
bIn the start field, click the arrow and choose 2.1.
cIn the LocalDialNo field, enter the local dial number string in quotes. For example, enter:
"4085551001"
dClick Apply.
eIn the start field, click the arrow and choose 2.2.
fIn the LocalDialNo field, ener the second local dial number in quotes. For example, enter:
"4085551002"
gClick Apply.
2Configure the path switch type.
aIn the Dial On Demand ISDN Setup section of the navigation frame, click the PATH SwitchType link.
ETSI is the default Switchtype configured. If you are provisioned by an ETSI ISDN Switch, then skip to step 3.
bIn the start field, click the arrow and choose 2.
cIn the SwitchType field, click the arrow and choose your switch type.
dClick Apply.
3Enable the ISDN paths.
a In the Dial On Demand ISDN Setup section of the
navigation frame, click the PATH CONTrol link. b In the start field, click the arrow and choose 2.1.
cIn the CONTrol field, click the arrow and choose Enabled.
dClick Apply.
Your ISDN line is now initialized.
4Logically assign the two ISDN paths to port 4.
a In the Dial On Demand ISDN Setup section of the navigation frame, click the PORT PAths link.
b In the start field, click the arrow and choose 4. c In the PAths field, enter 2.1, 2.2.
