SMC Networks BLW-54MF manual Basic Setup & Configuration

3.After entering the system, BLW-54MF will show you the Main page. During configuration, you can use the tabs on the top of the page and menu at the left side of the page to navigate. Besides, it is necessary that, after configuring, you should click Apply to enable the settings you have made.

If your BLW-54MF Wireless Router does not response, and you cannot enter the web configuration page, please follow the steps below to check if there is any problem:

1.Make sure that BLW-54MF Wireless Router is properly installed

and powered on, and LAN connection is O.K. You can test the

connection by using Ping command:

Open MS-DOS window or click Start RunĀ on the desktop to show the command prompt window.

Enter the command: ping 192.168.1.1

If it shows the message of Request time out, the problem

can be either disorder of connection, or the conflict between your PC's IP address and the router s IP address.

2.If your PC uses static IP address, the IP address must between in the range of 192.168.1.2~192.168.1.254, in order not to occupy the BLW-54MF s default IP address 192.168.1.1.

In addition, the subnet mask must be 255.255.255.0. To know more details of your PC and Internet connection, please check the TCP/IP settings on your PC.

Chapter 2 Basic Setup & Configuration

2

11